Tube Notcher

The TN-100 may be clamped in a vise or bolted to a table and used with a 1/2 in hand drill. In this way the TN-100 can be laid horizontal and when notching 45 degree angles the floor will not interfere with the tubing being notched. Also, since the hand drill is fed in horizontally, the drills weight doesnt try to force the hole saw in too fast. Tube Capacity 3/4 to 2 in diameter at angles up to 50 degrees in under 15 seconds.

Tube Notcher

The TN-100 may be clamped in a vise or bolted to a table and used with a 1/2 in hand drill. In this way the TN-100 can be laid horizontal and when notching 45 degree angles the floor will not interfere with the tubing being notched. Also, since the hand drill is fed in horizontally, the drills weight doesnt try to force the hole saw in too fast. Tube Capacity 3/4 to 2 in diameter at angles up to 50 degrees in under 15 seconds.